Arkadaşlar WalkerBug Pro marka elektrikli scooter markasının üretici firması Levy => https://support.levyelectric.com/hc/en-us/

siteleri de burada. Artık hata kodlarına ulaşabilir ve neler yapmanız gerektiğine dair fikir edinebilirsiniz. Google da hiç bir yerde hata kodlarına dair bir yazıya rastlamadım ancak bu sitede her türlü bilgi var. Rica ederim. İyi günler.

WalkerBug PRO hata kodları:

C kodu için;

A flashing letter "C" on the display screen of a Levy Scooter indicates that the motor controller needs to be replaced. You can find information about Swapping out the motor controller on the Levy / Levy Plus linked. It is important to check the wire connections between the motor controller and the motor when swapping out the controller. In some rare cases, clipped or fused wires leading into or out of the controller may mean you need to replace other parts beyond the controller to fix a "C" error code.

F veya E kodu için:

A flashing letter "E" or "F" on the display screen of a Levy Plus scooter indicates connection issues between the battery and the scooter. The most common cause of this is error code is the battery being inserted into the scooter incorrectly. There will always be a 'clicking' sound when the battery is inserted properly into the Levy Plus. The following link goes further in depth: Removing / Inserting the battery on the Levy Plus.

If the battery is clicked in properly and the error code is still occurring, then this connection issue may be caused by damage on either the connector pins of the motor controller or the connection point on the battery itself. If you believe this to be the case, please use the support form on our website to reach out to our team for help.

0C veya OC hata kodu:

The letters "OC" will always flash on the Scooter's display when it first turns on. If this code goes away after a couple of seconds and the scooter remains on and functioning then there is no reason for concern.

If the scooter flashes "OC" and then immediately turns off or if the display flashes an "O" or "OC" and has an unresponsive throttle then there may be damaged on the hall sensor or hall sensor wire of the scooter's motor. This issue will also commonly cause the front motor to 'lock up' so it cannot spin freely. This type of damage is best fixed by replacing the front motor.

Geçmiş olsun şimdiden. Anlayamayan google translate kullanabilir. Rica ederim.