CORSAİR RM750X Type 4 Kablo Yerine Type 3 Uyar mı?

quote:

Orijinalden alıntı: Kadekici10

Ben biraz baktım. İngilizce biliyorsan burada bu konuyu tartışmışlar.
http://forum.corsair.com/v3/showthread.php?p=860488

"
So the Type 3 cable is technically compatible with the RM750x. You will have to cut off the retention clip on the 14-pin connector, and then plug it into the 750x. However, you can also just transfer the 14-wires onto an 18-pin connector, similar the picture previously posted. The wiring placement needs to be exactly the same as the 14-pin, with the "left" four pins being completely blank.

Outside of this, no the Type 3 RM750 24-Pin cables will not work out of the box with a Type 4 RM750x.
"
Bu adam diyoki 3 deki kablonun başındaki tırnakları kesersen olur.

"you can use type 3 cables on a type 4 PSU, but why would you? you will reduce the voltage accuracy and ripple suppression of the RM750x. either sleeve your own cable or wait util corsair starts selling the sleeved type 4 ATX cable. or return the RM750x and get a regular RM750.

type 4 cables have extra wires on all cables that feedback information from your other components back to the PSU which the PSU then uses to correct it's output. there are also capacitors inside those type 4 cables that help suppress voltage ripple. removing those feedback wires and caps will turn your RM750x into a more efficient CX750M. ripple will be 3 or 4 time higher and voltage regulation will also drop. total waste of money
"
Bu adamda diyoki olur ama çektiğin V düşer, geri besleme olmaz.(yani olur ama yazın sıcak su içmek gibi olur diyor/performansın düşer diyor)