5çıkışlı kumandalı, 3hdmi girişli, dolby digital dts destekli radyolu sinema receiver resimler temsilidir
fiyat 700TL
Features Power • 70W x 5 into 6 ohms, 1kHz, at <0.07% THD, one channel driven • 35W x 5 into 8 ohms, 20Hz – 20kHz, at <0.07% THD, with all channels driven simultaneously • High-current (±25 amps), ultrawide-bandwidth (10Hz – 100kHz) amplifi er design Surround Processing • Dolby Digital surround decoding using an advanced Cirrus Logic ® CS 49510 32-bit DSP processor
• Full suite of DTS modes • DTS 5.1 (Movie, Music and Game modes) surround sound • Harman-exclusive Logic 7 Cinema and Music surround sound processing in 5.1 channels • Dolby Headphone and Dolby Virtual Speaker surround modes • Five-channel Stereo, Hall and Theater surround modes • 192kHz/24-Bit DAC
Connectivity • Three HDMI inputs and one HDMI output • Two assignable, wide-bandwidth (100MHz), HDTV-ready component video inputs and one output • Subwoofer output for direct connection to a powered subwoofer • Three A/V inputs, plus two audio-only inputs • Six-channel-direct inputs for use with external surround decoders • Convenient front-panel audio/video input for use with video games or portable players • Six digital inputs (two optical and two coaxial on rear panel, and one optical and one coaxial on front panel) • One coaxial digital output on rear panel • Front-panel auxiliary input for connecting portable media players Ease of Use • HDMI switching • A/V Sync Delay adjustable for each input • FM stereo/AM tuner with 30 presets and direct-access tuning • Triple-crossover bass manager • Wide range of low-frequency crossover points (40Hz, 60Hz, 80Hz, 100Hz, 120Hz and 200Hz) available • Programmable power-up volume • Six-device, preprogrammed system remote control
The AVR 142 is all about getting connected – digitally. It features three HDMI ™ inputs,
two wide-bandwidth HDTV-ready component video inputs, a front-panel input for video games, an auxiliary input for portable media players, and a portfolio of advanced surround-processing technologies, including Dolby
® Digital, DTS® and Logic 7® processing.
With the AVR 142, your speakers never heard it so good!
Key Specifi cations • Audio Section – Continuous Average Power (FTC), (stereo mode): 40 watts per channel into 8 ohms @ 20Hz – 20kHz, <0.07% THD, both channels driven; (fi ve-channel surround mode): 70 watts per channel into 6 ohms @ 1kHz, <0.07% THD, one channel driven; 35 watts per channel into 8 ohms @ 20Hz – 20kHz, <0.07% THD, all channels driven; High Instantaneous Current capability (HCC): ±25 amps • Tuner – Usable Sensitivity: IHF 1.3μV/13.2dBf; THD at 1kHz with 100% modulation, (mono): 0.2%; (stereo): 0.3%; FM Adjacent Channel Selectivity: ±400kHz, 70dB; Ultimate (maximum) S/N Ratio (measured at 1mV RF input level), (mono): 70dB; (stereo): 68dB • Dimensions (H x W x D) and weight: 165mm x 440mm x 382mm, 10.9kg