Profil: novrasis | DonanımHaber Forum

Şimdi Ara

@novrasis

Takip Et 0 takipçi

Özel Mesaj

Onbaşı

24 Eylül 2009
Tarihinde Katıldı

Takip Ettikleri
0 üye

Görüntülenme
Toplam: 11 (Bu ay: 0)

Fırsat Ekle

Gönderileri

Tümü (3)

Sadece Konular (3)

Sadece Bağlantılar (0)

novrasis (erdem yaşar) · Tv Genel altına konu açtı. 8 yıl

43ku7000 ışık sızması kirli ekran ve gölgelenme sorunu

1 Yanıt

Yanıtla

Favorilere Ekle

novrasis (erdem yaşar) · Televizyonlar altına konu açtı. 15 yıl

LH3000 3,15 VE 3,40 VERSİYONLARI LAZIM

Yanıt Yok

Yanıtla

Favorilere Ekle

novrasis (erdem yaşar) · Medya Oynatıcılar altına konu açtı. 15 yıl

lg dv492 h hack ingilizce metin

BU YAZIYI İNTERNETTE BULDUM İNGİLİZCESİ OLAN ARKADAŞLAR ÇEVİRİSİNİ YAPABİLİRLERMİ BU DOSYA NE İŞE YARIYOR bu cihazda dvx hd playbak diyor playbak hd dvix okuması anlamına geliyorsa bu cihaz dvix hd filmleri okumuyor ne cd de nede usb de lg merkezini aradım servisni aradım adamlar cihazın özellilerinden haberleri yok

Help us keep the list up to date and Submit new DVD and Blu-ray Players here. This list is based from user reports and we have not verified or tested any region codes use them at your own risk.

What are region codes, country codes, or zone locks? Read the DVD Demystified FAQ section 1.10.

Search DVD Player:
Hits per page: 2550100150200

DVD Player Hacks Updated Add
LG DVX482H 2 user region code/hacks September 18, 2009 Post region code/**** comment
Region code **** posted by BKing, August 20 2009:
I own the LG DVX482 (without the H) so I'm not 100% sure if it also works on the H-version.
But try the CD-**** as mentioned here (for the 492H):
http://www.videohelp.com/dvdhacks?dvdplayer=LG+DV492H
or just search for JorgoLG-DVX276hack.iso

It worked for me like a charm!

Region code **** posted by Moonbase, September 18 2009:
Above works for my LG DVX-482H (firmware v1.14). The ISO CD you burn contains just a call to the built-in "Region Code Management".

1. Get the "lg.dvx492h.regionfree.zip" file and extract it.
2. The ISO file "JorgoLG-DVX276hack.iso" must be burnt to a CD-R. (You should finalize the disc, but you mustn't.)
3. Power on the DVX-482H.
4. Insert the disc. A blue screen "Region Code Management" should appear.
5. Enter a "0" (zero) using your remote (or any other region code you wish to lock your player to, 0 meaning "multi-region") and press PAUSE on the remote.
6. The start screen with the LG logo should re-appear.
7. Remove your CD from the player.
8. Switch off your player, wait a few seconds, and switch it on again.
9. Enjoy multi-region DVD playback!

In case you want to verify your firmware/chipset/servo versions before or need to do a factory reset, proceed as follows:

1. Switch on your DVX-482H.
2. Be sure that there is no disc in the player.
3. Press SETUP on the remote.
4. Proceed to "TV" -> "TV Aspect" -> "16:9" but don't SELECT it, just move the cursor there.
5. Press the digits 1 3 9 7 1 3 9 and ENTER on your remote.
6. A factory reset will be done, and Model, Chip Id, Main Version, Servo Version, Touch *** Version, Region No., HDCP *** and Checksum shown.
7. To leave this mode, press SETUP again, then switch off your unit.
8. When switching it on again, it will be like fresh from the factory - you'll even have to specify the menu language again.

LG DVX492H 4 user region code/hacks September 12, 2009 Post region code/**** comment
Region code **** posted by pigandsheep, June 19 2009:
I have just used the CD **** as advised on this site for the LG dvx350. works fine.

Region code **** posted by williva, July 01 2009:
The stock Tesco are selling are Region Free but not sold as such. Check the 'Setup' on your machine before burning a **** cd you might not need. Sounds obvious but I didnt, assumed I needed a **** and had a frustrating time that I could have avoided! Apologies if this no-**** message offends the rules.

Region code **** posted by Irregular Shed, July 06 2009:
Bought my DVX492H from Tesco - unfortunately it wasn't region-free out of the box like the previous correspondent found. However, as the other correspondent reported, the CD **** for a different model of DVD player works perfectly. I've mirrored it here:

http://www.box.net/shared/v07pyb4e9x

It's a tiny file; the **** is an 11 byte ASCII file two directory levels deep on a CD-ROM. Instructions are in a text file in the archive.

Region code **** posted by speakmanjack, September 12 2009:
For the LG DV492h, the ISO disc is not required. Just eject the disc tray, and while it's open hit 0 - 0 (two zeros) on the remote. Then enter 0 for the region code (for all regions.)

2 Yanıt

Yanıtla

Favorilere Ekle

Resimler

https://forum.donanimhaber.com/cache-v2?path=https%3a%2f%2fforum.donanimhaber.com%2fstore%2fe5%2f6d%2f91%2fe56d918274e6591db3f055b73a91be62.jpg&t=1&text=0&width=87

https://forum.donanimhaber.com/cache-v2?path=https%3a%2f%2fforum.donanimhaber.com%2fstore%2f31%2ff0%2fc9%2f31f0c9167acf6122a67b373b0c5a252c.jpg&t=1&text=0&width=87

https://forum.donanimhaber.com/cache-v2?path=https%3a%2f%2fforum.donanimhaber.com%2fstore%2f7a%2fb1%2f1c%2f7ab11c49aeb1e67bdeff7b2903b45745.jpg&t=1&text=0&width=87

https://forum.donanimhaber.com/cache-v2?path=https%3a%2f%2fforum.donanimhaber.com%2fstore%2f13%2f57%2f68%2f135768e20c9e18f8b347547c25449216.jpg&t=1&text=0&width=87

4 Galeride Göster

Temel Bilgiler ve İstatistikler

Aktiflik: Şu anda DH'de değil
Son Giriş: 6 yıl önce
Son Mesaj Zamanı: 6 yıl
Mesaj Sayısı: 17
Gerçek Toplam Mesaj Sayısı: 17
İkinci El Bölümü Mesajları: 0
Konularının görüntülenme sayısı: 521 (Bu ay: 2)
Toplam aldığı artı oy sayısı: 1 (Bu hafta: 0)
En çok mesaj yazdığı forum bölümü: Ev Elektroniği ve Elektrikli Ev Aletleri

Mesajları

İkinci El Referansları