Şimdi Ara

Arduino uno kartı için derleme hatası [ÇÖZÜLDÜ]

Daha Fazla
Bu Konudaki Kullanıcılar: Daha Az
2 Misafir - 2 Masaüstü
5 sn
6
Cevap
0
Favori
12.423
Tıklama
Daha Fazla
İstatistik
  • Konu İstatistikleri Yükleniyor
0 oy
Öne Çıkar
Sayfa: 1
Giriş
Mesaj
  • Arduino cihazını 3 ay önce denemiştim sorunsuz çalışıyordu. Şimdi kod atmaya çalıştığımda derleme hatası veriyor sürekli.

    Kontrol et butonuna bastıktan sonra
    Arduino uno kartı için derleme hatası [ÇÖZÜLDÜ]


    D:\Arduino\arduino-builder -dump-prefs -logger=machine -hardware D:\Arduino\hardware -tools D:\Arduino\tools-builder -tools D:\Arduino\hardware\tools\avr -built-in-libraries D:\Arduino\libraries -libraries C:\Users\acros\Documents\Arduino\libraries -fqbn=arduino:avr:uno -vid-pid=1A86_7523 -ide-version=10812 -build-path C:\Users\acros\AppData\Local\Temp\arduino_build_410280 -warnings=none -build-cache C:\Users\acros\AppData\Local\Temp\arduino_cache_147141 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avr-gcc.path=D:\Arduino\hardware\tools\avr -prefs=runtime.tools.avr-gcc-7.3.0-atmel3.6.1-arduino5.path=D:\Arduino\hardware\tools\avr -prefs=runtime.tools.arduinoOTA.path=D:\Arduino\hardware\tools\avr -prefs=runtime.tools.arduinoOTA-1.3.0.path=D:\Arduino\hardware\tools\avr -prefs=runtime.tools.avrdude.path=D:\Arduino\hardware\tools\avr -prefs=runtime.tools.avrdude-6.3.0-arduino17.path=D:\Arduino\hardware\tools\avr -verbose C:\Users\acros\AppData\Local\Temp\untitled1659804333.tmp\sketch_jun04a\sketch_jun04a.ino
    D:\Arduino\arduino-builder -compile -logger=machine -hardware D:\Arduino\hardware -tools D:\Arduino\tools-builder -tools D:\Arduino\hardware\tools\avr -built-in-libraries D:\Arduino\libraries -libraries C:\Users\acros\Documents\Arduino\libraries -fqbn=arduino:avr:uno -vid-pid=1A86_7523 -ide-version=10812 -build-path C:\Users\acros\AppData\Local\Temp\arduino_build_410280 -warnings=none -build-cache C:\Users\acros\AppData\Local\Temp\arduino_cache_147141 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avr-gcc.path=D:\Arduino\hardware\tools\avr -prefs=runtime.tools.avr-gcc-7.3.0-atmel3.6.1-arduino5.path=D:\Arduino\hardware\tools\avr -prefs=runtime.tools.arduinoOTA.path=D:\Arduino\hardware\tools\avr -prefs=runtime.tools.arduinoOTA-1.3.0.path=D:\Arduino\hardware\tools\avr -prefs=runtime.tools.avrdude.path=D:\Arduino\hardware\tools\avr -prefs=runtime.tools.avrdude-6.3.0-arduino17.path=D:\Arduino\hardware\tools\avr -verbose C:\Users\acros\AppData\Local\Temp\untitled1659804333.tmp\sketch_jun04a\sketch_jun04a.ino
    Using board 'uno' from platform in folder: D:\Arduino\hardware\arduino\avr
    Using core 'arduino' from platform in folder: D:\Arduino\hardware\arduino\avr
    Detecting libraries used...
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10812 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-ID:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino" "-ID:\\Arduino\\hardware\\arduino\\avr\\variants\\standard" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\sketch\\sketch_jun04a.ino.cpp" -o nul
    Generating function prototypes...
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10812 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-ID:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino" "-ID:\\Arduino\\hardware\\arduino\\avr\\variants\\standard" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\sketch\\sketch_jun04a.ino.cpp" -o "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\preproc\\ctags_target_for_gcc_minus_e.cpp"
    "D:\\Arduino\\tools-builder\\ctags\\5.8-arduino11/ctags" -u --language-force=c++ -f - --c++-kinds=svpf --fields=KSTtzns --line-directives "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\preproc\\ctags_target_for_gcc_minus_e.cpp"
    Çalışma derleniyor...
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10812 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-ID:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino" "-ID:\\Arduino\\hardware\\arduino\\avr\\variants\\standard" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\sketch\\sketch_jun04a.ino.cpp" -o "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\sketch\\sketch_jun04a.ino.cpp.o"
    Compiling libraries...
    Compiling core...
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc" -c -g -x assembler-with-cpp -flto -MMD -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10812 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-ID:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino" "-ID:\\Arduino\\hardware\\arduino\\avr\\variants\\standard" "D:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino\\wiring_pulse.S" -o "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\wiring_pulse.S.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc" -c -g -Os -w -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10812 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-ID:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino" "-ID:\\Arduino\\hardware\\arduino\\avr\\variants\\standard" "D:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino\\WInterrupts.c" -o "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\WInterrupts.c.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc" -c -g -Os -w -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10812 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-ID:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino" "-ID:\\Arduino\\hardware\\arduino\\avr\\variants\\standard" "D:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino\\hooks.c" -o "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\hooks.c.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc" -c -g -Os -w -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10812 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-ID:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino" "-ID:\\Arduino\\hardware\\arduino\\avr\\variants\\standard" "D:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino\\wiring_pulse.c" -o "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\wiring_pulse.c.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc" -c -g -Os -w -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10812 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-ID:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino" "-ID:\\Arduino\\hardware\\arduino\\avr\\variants\\standard" "D:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino\\wiring_digital.c" -o "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\wiring_digital.c.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc" -c -g -Os -w -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10812 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-ID:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino" "-ID:\\Arduino\\hardware\\arduino\\avr\\variants\\standard" "D:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino\\wiring.c" -o "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\wiring.c.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc" -c -g -Os -w -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10812 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-ID:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino" "-ID:\\Arduino\\hardware\\arduino\\avr\\variants\\standard" "D:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino\\wiring_analog.c" -o "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\wiring_analog.c.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc" -c -g -Os -w -std=gnu11 -ffunction-sections -fdata-sections -MMD -flto -fno-fat-lto-objects -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10812 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-ID:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino" "-ID:\\Arduino\\hardware\\arduino\\avr\\variants\\standard" "D:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino\\wiring_shift.c" -o "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\wiring_shift.c.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10812 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-ID:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino" "-ID:\\Arduino\\hardware\\arduino\\avr\\variants\\standard" "D:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino\\IPAddress.cpp" -o "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\IPAddress.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10812 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-ID:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino" "-ID:\\Arduino\\hardware\\arduino\\avr\\variants\\standard" "D:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino\\PluggableUSB.cpp" -o "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\PluggableUSB.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10812 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-ID:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino" "-ID:\\Arduino\\hardware\\arduino\\avr\\variants\\standard" "D:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino\\USBCore.cpp" -o "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\USBCore.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10812 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-ID:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino" "-ID:\\Arduino\\hardware\\arduino\\avr\\variants\\standard" "D:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino\\CDC.cpp" -o "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\CDC.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10812 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-ID:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino" "-ID:\\Arduino\\hardware\\arduino\\avr\\variants\\standard" "D:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino\\HardwareSerial1.cpp" -o "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\HardwareSerial1.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10812 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-ID:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino" "-ID:\\Arduino\\hardware\\arduino\\avr\\variants\\standard" "D:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino\\Stream.cpp" -o "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\Stream.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10812 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-ID:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino" "-ID:\\Arduino\\hardware\\arduino\\avr\\variants\\standard" "D:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino\\Print.cpp" -o "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\Print.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10812 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-ID:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino" "-ID:\\Arduino\\hardware\\arduino\\avr\\variants\\standard" "D:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino\\HardwareSerial3.cpp" -o "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\HardwareSerial3.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10812 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-ID:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino" "-ID:\\Arduino\\hardware\\arduino\\avr\\variants\\standard" "D:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino\\Tone.cpp" -o "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\Tone.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10812 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-ID:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino" "-ID:\\Arduino\\hardware\\arduino\\avr\\variants\\standard" "D:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino\\HardwareSerial.cpp" -o "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\HardwareSerial.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10812 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-ID:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino" "-ID:\\Arduino\\hardware\\arduino\\avr\\variants\\standard" "D:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino\\HardwareSerial2.cpp" -o "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\HardwareSerial2.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10812 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-ID:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino" "-ID:\\Arduino\\hardware\\arduino\\avr\\variants\\standard" "D:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino\\HardwareSerial0.cpp" -o "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\HardwareSerial0.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10812 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-ID:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino" "-ID:\\Arduino\\hardware\\arduino\\avr\\variants\\standard" "D:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino\\WMath.cpp" -o "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\WMath.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10812 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-ID:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino" "-ID:\\Arduino\\hardware\\arduino\\avr\\variants\\standard" "D:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino\\WString.cpp" -o "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\WString.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10812 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-ID:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino" "-ID:\\Arduino\\hardware\\arduino\\avr\\variants\\standard" "D:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino\\abi.cpp" -o "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\abi.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10812 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-ID:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino" "-ID:\\Arduino\\hardware\\arduino\\avr\\variants\\standard" "D:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino\\main.cpp" -o "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\main.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -Wno-error=narrowing -MMD -flto -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10812 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR "-ID:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino" "-ID:\\Arduino\\hardware\\arduino\\avr\\variants\\standard" "D:\\Arduino\\hardware\\arduino\\avr\\cores\\arduino\
    ew.cpp" -o "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\
    ew.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\core.a" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\wiring_pulse.S.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\core.a" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\WInterrupts.c.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\core.a" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\hooks.c.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\core.a" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\wiring.c.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\core.a" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\wiring_analog.c.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\core.a" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\wiring_digital.c.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\core.a" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\wiring_pulse.c.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\core.a" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\wiring_shift.c.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\core.a" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\CDC.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\core.a" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\HardwareSerial.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\core.a" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\HardwareSerial0.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\core.a" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\HardwareSerial1.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\core.a" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\HardwareSerial2.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\core.a" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\HardwareSerial3.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\core.a" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\IPAddress.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\core.a" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\PluggableUSB.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\core.a" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\Print.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\core.a" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\Stream.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\core.a" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\Tone.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\core.a" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\USBCore.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\core.a" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\WMath.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\core.a" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\WString.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\core.a" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\abi.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\core.a" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\main.cpp.o"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc-ar" rcs "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\\core.a" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\core\
    ew.cpp.o"
    C:\Users\acros\AppData\Local\Temp\arduino_cache_147141\core\core_arduino_avr_uno_fd040c28ca717db04400ddff4ecd4334.a 'de yerleşik çekirdek arşivleme (önbellekleme)
    Linking everything together...
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-gcc" -w -Os -g -flto -fuse-linker-plugin -Wl,--gc-sections -mmcu=atmega328p -o "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280/sketch_jun04a.ino.elf" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280\\sketch\\sketch_jun04a.ino.cpp.o" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280/core\\core.a" "-LC:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280" -lm
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-objcopy" -O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0 "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280/sketch_jun04a.ino.elf" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280/sketch_jun04a.ino.eep"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-objcopy" -O ihex -R .eeprom "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280/sketch_jun04a.ino.elf" "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280/sketch_jun04a.ino.hex"
    "D:\\Arduino\\hardware\\tools\\avr/bin/avr-size" -A "C:\\Users\\acros\\AppData\\Local\\Temp\\arduino_build_410280/sketch_jun04a.ino.elf"
    Çalışmanız programın 444 bayt (1 %) saklama alanını kullandı. Maksimum 32256 bayt.
    Global değişkenler belleğin 9 byte kadarını (0%) kullanıyor. Yerel değişkenler için 2039 byte yer kalıyor. En fazla 2048 byte kullanılabilir.


    Yükle butonundan sonra:
    Arduino uno kartı için derleme hatası [ÇÖZÜLDÜ]

    D:\Arduino\arduino-builder -dump-prefs -logger=machine -hardware D:\Arduino\hardware -tools D:\Arduino\tools-builder -tools D:\Arduino\hardware\tools\avr -built-in-libraries D:\Arduino\libraries -libraries C:\Users\acros\Documents\Arduino\libraries -fqbn=arduino:avr:uno -vid-pid=1A86_7523 -ide-version=10812 -build-path C:\Users\acros\AppData\Local\Temp\arduino_build_410280 -warnings=none -build-cache C:\Users\acros\AppData\Local\Temp\arduino_cache_147141 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avr-gcc.path=D:\Arduino\hardware\tools\avr -prefs=runtime.tools.avr-gcc-7.3.0-atmel3.6.1-arduino5.path=D:\Arduino\hardware\tools\avr -prefs=runtime.tools.arduinoOTA.path=D:\Arduino\hardware\tools\avr -prefs=runtime.tools.arduinoOTA-1.3.0.path=D:\Arduino\hardware\tools\avr -prefs=runtime.tools.avrdude.path=D:\Arduino\hardware\tools\avr -prefs=runtime.tools.avrdude-6.3.0-arduino17.path=D:\Arduino\hardware\tools\avr -verbose C:\Users\acros\AppData\Local\Temp\untitled1659804333.tmp\sketch_jun04a\sketch_jun04a.ino
    D:\Arduino\arduino-builder -compile -logger=machine -hardware D:\Arduino\hardware -tools D:\Arduino\tools-builder -tools D:\Arduino\hardware\tools\avr -built-in-libraries D:\Arduino\libraries -libraries C:\Users\acros\Documents\Arduino\libraries -fqbn=arduino:avr:uno -vid-pid=1A86_7523 -ide-version=10812 -build-path C:\Users\acros\AppData\Local\Temp\arduino_build_410280 -warnings=none -build-cache C:\Users\acros\AppData\Local\Temp\arduino_cache_147141 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.avr-gcc.path=D:\Arduino\hardware\tools\avr -prefs=runtime.tools.avr-gcc-7.3.0-atmel3.6.1-arduino5.path=D:\Arduino\hardware\tools\avr -prefs=runtime.tools.arduinoOTA.path=D:\Arduino\hardware\tools\avr -prefs=runtime.tools.arduinoOTA-1.3.0.path=D:\Arduino\hardware\tools\avr -prefs=runtime.tools.avrdude.path=D:\Arduino\hardware\tools\avr -prefs=runtime.tools.avrdude-6.3.0-arduino17.path=D:\Arduino\hardware\tools\avr -verbose C:\Users\acros\AppData\Local\Temp\untitled1659804333.tmp\sketch_jun04a\sketch_jun04a.ino
    Using board 'uno' from platform in folder: D:\Arduino\hardware\arduino\avr
    Using core 'arduino' from platform in folder: D:\Arduino\hardware\arduino\avr
    Detecting libraries used...
    Arduino Uno kartı için derleme hatası.


    Arduino uno kartı için derleme hatası [ÇÖZÜLDÜ]



    < Bu mesaj bu kişi tarafından değiştirildi acrossfire1 -- 5 Haziran 2020; 13:51:21 >







  • Yapay Zekanın Yanıtı

    Arduino Uno Kartı için Derleme Hatası Çözümü

    Arduino Uno kartı kullanırken derleme hatalarıyla karşılaşabilirsiniz. Bu hatalar genellikle yazılım veya donanım sorunlarından kaynaklanır. Bu metinde, Arduino Uno kartı için derleme hatalarını gidermeye yönelik yaygın çözümler sunacağız.

    Yaygın Derleme Hataları

    Arduino Uno kartı için karşılaşabileceğiniz yaygın derleme hataları şunlardır:

    • Exit status 1: Bu hata, derleyicinin programı derleyemediğini gösterir.
    • Arduino derleme hatası: Bu hata, derleyici tarafından bildirilmeyen genel bir hatadır.

    Hata Giderme Adımları

    Arduino Uno kartı için derleme hatalarını gidermek için şu adımları izleyebilirsin:

    • Arduino IDE'nin güncel olduğundan emin ol: Güncellemeler, hataları gideren düzeltmeler içerebilir.
    • Kodunu dikkatlice kontrol et: Yazım hataları, eksik noktalı virgüller veya diğer sözdizimsel hatalar derleme hatalarına neden olabilir.
    • Bağlantıları ve kabloları kontrol et: Gevşek bağlantılar veya hasarlı kablolar derleme hatalarına neden olabilir.
    • Donanımı kontrol et: Arduino Uno kartın ve bağlı bileşenler düzgün çalışıyor olmalıdır.
    • Üçüncü taraf kütüphaneleri güncelle: Kullanıyorsan hatalı veya uyumsuz kütüphaneler derleme hatalarına neden olabilir.
    • Arduino Uno kartını yeniden başlat: Bu, geçici hataları giderebilir.
    • Çevrimiçi forumlarda veya belgelerde yardım ara: Diğer kullanıcılar benzer sorunlarla karşılaşmış olabilir ve çözümler paylaşmış olabilir.

    Sonuç

    Yukarıdaki adımları izleyerek Arduino Uno kartı için derleme hatalarını giderebilirsin. Hataları giderdikten sonra kodunu başarıyla derleyebilecek ve Arduino Uno'nu istediğin gibi programlayabileceksin.

    Yapay Zekanın Yanıtını Genişlet
  • Merhaba. Arduinodan hiç anlamıyorum öncelikle belirteyim. Lakin hata mesajındaki yolun sonunda "sketch_jun04a.ino" terimini aratınca engelden kaçan araba projesi çıktı. Projenin sayfasına ulaştım ve yapımcısı sayfada kaynak kodu paylaşmış fakat hookup bağlantı şemasını vermemiş. En aşağıdaki yorumlarda da birileri sizin bahsettiğinize benzer bir kod hatası için yardım talep etmiş ve yardım etmiş:
    https://www.instructables.com/id/Obstacle-Avoiding-Arduino-Car/

    Aynı şekilde arduinonun resmi sitesinde de bir derleme hatasının çözümü verilmiş:
    forum.arduino.cc
    Error compiling for board Arduino Uno.
    https://forum.arduino.cc/index.php?topic=688338.0


    Tekrar hatırlatıyorum, ben bu işlerden hiç anlamam fakat bir site için makale çevirisi yaptığım için tanıdık geldi. Konu bununla ilgili değilse özür dilerim,

    İyi çalışmalar...




  • quote:

    Orijinalden alıntı: KendiİsteğiyleAyrıldı

    Merhaba. Arduinodan hiç anlamıyorum öncelikle belirteyim. Lakin hata mesajındaki yolun sonunda "sketch_jun04a.ino" terimini aratınca engelden kaçan araba projesi çıktı. Projenin sayfasına ulaştım ve yapımcısı sayfada kaynak kodu paylaşmış fakat hookup bağlantı şemasını vermemiş. En aşağıdaki yorumlarda da birileri sizin bahsettiğinize benzer bir kod hatası için yardım talep etmiş ve yardım etmiş:
    https://www.instructables.com/id/Obstacle-Avoiding-Arduino-Car/

    Aynı şekilde arduinonun resmi sitesinde de bir derleme hatasının çözümü verilmiş:
    https://forum.arduino.cc/index.php?topic=688338.0

    Tekrar hatırlatıyorum, ben bu işlerden hiç anlamam fakat bir site için makale çevirisi yaptığım için tanıdık geldi. Konu bununla ilgili değilse özür dilerim,

    İyi çalışmalar...
    Teşekkür ederim güzel bir araştırma yapmışsınız :) . ikinci attığınız konuyu açan kişide benim bu arada verdiği çözüm işe yaramadı :D



    < Bu mesaj bu kişi tarafından değiştirildi acrossfire1 -- 5 Haziran 2020; 13:52:53 >




  • Sorunu çözdüm ve buraya aynı sebeple bakan biri olur diye yazmak istedim.

    Bendeki cihaz klon sürüm yani ch340 dediğimiz modeli. Ben daha önce 1.8.6 sürümü ile sorunsuz çalıştırıyordum fakat tekrar indirdiğim sürümü 1.8.12
    bu sürümde uyumsuzluk yaşıyor klon versiyon. Sürüm düşürmek olayı çözdü bende
  • quote:

    Orijinalden alıntı: acrossfire1

    Sorunu çözdüm ve buraya aynı sebeple bakan biri olur diye yazmak istedim.

    Bendeki cihaz klon sürüm yani ch340 dediğimiz modeli. Ben daha önce 1.8.6 sürümü ile sorunsuz çalıştırıyordum fakat tekrar indirdiğim sürümü 1.8.12
    bu sürümde uyumsuzluk yaşıyor klon versiyon. Sürüm düşürmek olayı çözdü bende
    Geri bildirim iyidir
  • 
Sayfa: 1
- x
Bildirim
mesajınız kopyalandı (ctrl+v) yapıştırmak istediğiniz yere yapıştırabilirsiniz.