Samsung 250GB 3.5' HDD Not Ready Hatası

SaGini

Yüzbaşı

317 Mesaj

Tüm Başarılarını Gör

Herkese iyi günler, iyi çalışmalar.

Yaklaşık 3 sene yada daha uzun zamandır kenarda, muhafazalı bir şekilde yatmakta olan (neden kenara aldığımı dahi hatırlamadığım) cihazıma bir el atmaya karar verdim. Bilgisayarıma bağladım ve windows başlatılıyor ekranından ileriye geçemedim ne yazıkki.

Bende bunun üzerine surface scan yapmak için flash belleğime Ultimate Boot CD 'yi boot edebileceğim şekilde yükledim. İçinde bulunan diagnose toollardan Vivard'ı açtım ve surface scan başlattım. Testi ne yazıkki bitiremedim. daha doğrusu bitirecek kadar sabrım olmadı :) test sırasında aldıgım görüntüleri ekledim. Orada görebilirsiniz.

Daha sonra yine Ultimate Boot CD içerisinde mevcut olan "Parted Magic" isimli bir nevi mini-unix toolu çalıştırdım. Orda Diskimi görebildim. Disk Health durumunda bir hata görünmese de nezaman diskle ilgili bir işleme kalkışsam işlem hep yavaş ve gürültülü oldu. Orda gerçekleştirdiğim test sonuçlarını aşağıya ekliyorum.

Aynı zamanda harddiskten nasıl sesler geldiğini dinletmek amacıyla kısa videoyuda ekledim.

Not: Diskim 250 GB 3.5" Samsung SP2504C

Benim size danışmak istediğim şey ise diskimdeki problem tam olarak nedir. Düzeltme şansım varmı? İçindeki bilgiler umrumda bile değil. Birşey olacaksa disk kurtulsun. Diskte çok umrumda değil açıkçası hiçbişey olmazsa içini açıp masama süs falan yapabilirim içindeki disklerle falan. Gözden çıkarmış durumdayım yani o yüzden tecrübeli arkadaşların nezaretinde deneysel çalışmalara girebiliriz. Aklıma yatan tavsiyeleri uçuk olsa dahi gerçekleştiricem.

smartctl 5.43 2012-06-30 r3573 [i686-linux-3.10.4-pmagic] (local build) 
  Copyright (C) 2002-12 by Bruce Allen,http://smartmontools.sourceforge.net 
   
  === START OF INFORMATION SECTION === 
  Model Family:     SAMSUNG SpinPoint P120 
  Device Model:     SAMSUNG SP2504C 
  Serial Number:    S09QJ1GLB61082 
  Firmware Version: VT100-50 
  User Capacity:    250,059,350,016 bytes [250 GB] 
  Sector Size:      512 bytes logical/physical 
  Device is:        In smartctl database [for details use: -P show] 
  ATA Version is:   7 
  ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 4a 
  Local Time is:    Wed Feb 26 08:21:26 2014 EET 
   
  ==> WARNING: May need -F samsung3 enabled; see manual for details. 
   
  SMART support is: Available - device has SMART capability. 
  SMART support is: Enabled 
   
  === START OF READ SMART DATA SECTION === 
  SMART overall-health self-assessment test result: PASSED 
  See vendor-specific Attribute list for marginal Attributes. 
   
  General SMART Values: 
  Offline data collection status:  (0x02)	Offline data collection activity 
  					was completed without error. 
  					Auto Offline Data Collection: Disabled. 
  Self-test execution status:      ( 105)	The previous self-test completed having 
  					the servo (and/or seek) element of the  
  					test failed. 
  Total time to complete Offline  
  data collection: 		( 5165) seconds. 
  Offline data collection 
  capabilities: 			 (0x5b) SMART execute Offline immediate. 
  					Auto Offline data collection on/off support. 
  					Suspend Offline collection upon new 
  					command. 
  					Offline surface scan supported. 
  					Self-test supported. 
  					No Conveyance Self-test supported. 
  					Selective Self-test supported. 
  SMART capabilities:            (0x0003)	Saves SMART data before entering 
  					power-saving mode. 
  					Supports SMART auto save timer. 
  Error logging capability:        (0x01)	Error logging supported. 
  					General Purpose Logging supported. 
  Short self-test routine  
  recommended polling time: 	 (   1) minutes. 
  Extended self-test routine 
  recommended polling time: 	 (  86) minutes. 
  SCT capabilities: 	       (0x003f)	SCT Status supported. 
  					SCT Error Recovery Control supported. 
  					SCT Feature Control supported. 
  					SCT Data Table supported. 
   
  SMART Attributes Data Structure revision number: 16 
  Vendor Specific SMART Attributes with Thresholds: 
  ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE 
    1 Raw_Read_Error_Rate     0x000f   253   100   051    Pre-fail  Always       -       0 
    3 Spin_Up_Time            0x0007   091   001   025    Pre-fail  Always   In_the_past 9600 
    4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       740 
    5 Reallocated_Sector_Ct   0x0033   253   253   010    Pre-fail  Always       -       0 
    7 Seek_Error_Rate         0x000f   253   253   051    Pre-fail  Always       -       0 
    8 Seek_Time_Performance   0x0025   253   253   015    Pre-fail  Offline      -       0 
    9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       1790 
   10 Spin_Retry_Count        0x0033   253   253   051    Pre-fail  Always       -       0 
   11 Calibration_Retry_Count 0x0012   100   100   000    Old_age   Always       -       104 
   12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       713 
  187 Reported_Uncorrect      0x0032   253   253   000    Old_age   Always       -       262144 
  190 Airflow_Temperature_Cel 0x0022   160   103   000    Old_age   Always       -       26 
  194 Temperature_Celsius     0x0022   160   103   000    Old_age   Always       -       26 
  195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age   Always       -       1860 
  196 Reallocated_Event_Count 0x0032   253   253   000    Old_age   Always       -       0 
  197 Current_Pending_Sector  0x0012   253   253   000    Old_age   Always       -       0 
  198 Offline_Uncorrectable   0x0030   253   253   000    Old_age   Offline      -       0 
  199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       172 
  200 Multi_Zone_Error_Rate   0x000a   253   100   000    Old_age   Always       -       0 
  201 Soft_Read_Error_Rate    0x000a   253   100   000    Old_age   Always       -       0 
  202 Data_Address_Mark_Errs  0x0032   253   253   000    Old_age   Always       -       0 
   
  SMART Error Log Version: 1 
  ATA Error Count: 1 
  	CR = Command Register [HEX] 
  	FR = Features Register [HEX] 
  	SC = Sector Count Register [HEX] 
  	SN = Sector Number Register [HEX] 
  	CL = Cylinder Low Register [HEX] 
  	CH = Cylinder High Register [HEX] 
  	DH = Device/Head Register [HEX] 
  	DC = Device Command Register [HEX] 
  	ER = Error register [HEX] 
  	ST = Status register [HEX] 
  Powered_Up_Time is measured from power on, and printed as 
  DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, 
  SS=sec, and sss=millisec. It "wraps" after 49.710 days. 
   
  Error 1 occurred at disk power-on lifetime: 1660 hours (69 days + 4 hours) 
    When the command that caused the error occurred, the device was active or idle. 
   
    After command completion occurred, registers were: 
    ER ST SC SN CL CH DH 
    -- -- -- -- -- -- -- 
    04 51 0f 2d 28 aa 4a  Error: ABRT at LBA = 0x0aaa282d = 178923565 
   
    Commands leading to the command that caused the error were: 
    CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name 
    -- -- -- -- -- -- -- --  ----------------  -------------------- 
    20 14 0f 2d 28 aa 4a 00      00:00:38.938  READ SECTOR(S) 
   
  SMART Self-test log structure revision number 1 
  Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error 
  # 1  Short offline       Completed: servo/seek failure 90%      1790         0 
   
  Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run 
  SMART Selective self-test log data structure revision number 0 
  Note: revision number not 1 implies that no selective self-test has ever been run 
   SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS 
      1        0        0  Not_testing 
      2        0        0  Not_testing 
      3        0        0  Not_testing 
      4        0        0  Not_testing 
      5        0        0  Not_testing 
  Selective self-test flags (0x0): 
    After scanning selected spans, do NOT read-scan remainder of disk. 
  If Selective self-test is pending on power-up, resume after 0 minute delay.

Samsung 250GB 3.5' HDD Not Ready Hatası

Benzer içerikler