Şimdi Ara

6800 (LE,NU,GT,ULTRA) -> QuadroFX4000

Daha Fazla
Bu Konudaki Kullanıcılar: Daha Az
3 Misafir - 3 Masaüstü
5 sn
30
Cevap
0
Favori
4.592
Tıklama
Daha Fazla
İstatistik
  • Konu İstatistikleri Yükleniyor
0 oy
Öne Çıkar
Sayfa: 12
Sayfaya Git
Git
sonraki
Giriş
Mesaj
  • Guru3d forumlarından alıntıdır.

    GF6800(LE,NU,GT,Ultra)->QuadroFX4000.
    I revised this guide . You can call it v1.01 Thanks for the correction in step 10(to Lord Banshee). However, I must thank the other ppl, like Choon-Man Lee, Yornotic Blue, rui0317, Unwinder, tc. to name a few. They started these modding threads and provided the tools and hints! Great guys/gals!

    -----------------------------------------------------------------------------------

    WARNING!!!
    DO NOT flash your board if you are not absolutely confident with BIOS flashing. You should know exactly what you are doing and you may damage your hardware if something gets wrong. DO NOT blame me if you did something wrong and dumped your investment. I am not responsible if you follow the instructions here. The steps here may be not 100% complete and true! SO YOU ARE WARNED!

    -----------------------------------------------------------------------------------

    First you need to download these things:
    1. Dell Quadro BIOS from HERE
    2. the NVFlash 5.10 tool from
    HERE
    3. OmniExtremeEditorFX for changing the NV40 core/memory frequency from this link HERE

    additional tools:
    4. Make a standard 3 1/2" bootdisk in Windows
    5. Download the 67.02 Forceware driver(just for the start, but any 6x.xx or higher will do) and RivaTuner 2.0 RC15.2, just look for them at download section ofhttp://www.guru3d.com/
    5.1: Download SPECviewperf 7.1.1 and/or 8.0.1 and make a test run before you start the modding. Save the results to a text file.
    6. Have a spare PCI graphics card handy for the emergency case!


    Preparations:
    7. Write down these two DOS commands on a paper, you will need them after you boot from the bootdisk:

    nvflash -b backup.rom

    nvflash -4 -5 -6 dell01.rom

    8. For all 6800LE and 6800 (non GT or Ultra) owners you may experience problems with this QuadroFX 4000 mod because you should have undamaged pixel pipelines and vertex pipelines on your GF6800 board. But the PP and VP can be masked out by your card vendor. Here I can only speak for those with 100% fully functional 16x1 PP and 6 VP. Check the other threads on this forum how to use Rivatuner's NVStrap feature to unlock the masked PP and VP. But this premise might be completely false. So, I don't know what happens if some masked PP/VP are damaged. Maybe someone here can correct me.

    9. Run OmniExtremeEditorFX you downloaded from above and open the Dell01.rom. Modify the 2D and 3d Performance clock rates of the GPU core & memory stored in Dell01.rom to the standrad level of your standard GF6800(LE,NU,GT,Ultra). Check the specs of your card! 6800 is core 325, memory 350(700MHz DDR). Set both 2D/3D Performance to the same value. Overwrite the Dell01.rom file or make a copy first and then overwrite.

    10. Copy your (modified) Dell01.rom file and the NVFLASH.EXE/CWSDPMI.EXE files to your bootdisk.(Thanks to Lord Banshee for the hint!)

    11. Reboot and go into your mainboard BIOS. Set the Boot sequence to boot from the floppy disk device first. Save the changes and exit the mainboard BIOS.

    12. Boot from your bootdisk. In DOS you run this command you wrote down before:

    nvflash -b backup.rom

    (This will backup your current GF6800 BIOS to the backup.rom file to the bootdisk)
    Then run this command:

    nvflash -4 -5 -6 dell01.rom

    (Type "y" to overwrite inspite of the warning that the PCI device ID is not identical. You will hear a total of two beeps. One at the warning and one when it is finished flashing. DO NOT TURN OFF YOUR PC OR MAKE ANY RESET until you hear the second beep and are back at the DOS prompt!)

    13. Now flashing is done. Back at the DOS prompt you can hit reset.

    14. you should notice the new boot screen of your succesful GF6800->QuadroFX4000 mod. In Windows install the 67.02 driver. Reboot. Now check the Forceware driver for OpenGL settings & confirm your mod was successful!

    15. Still not convinced? (Vsync OFF) Run the Specview 7.1.1/8.0.1 benchmark and compare your results to your first test run. If you want to see the difference really fast, just run the UGS-03/UGS-04 benchmark only. In GF mode this benchmark crawls, in Quadro it flies

    16. Run Rivatuner, there install NVStrap and enable all other pixel/vertex pipelines. Reboot. You should have "16x1, 6vp" in the NVStrap tab of Rivatuner. ("12x1, 5vp" is default in the Dell Quadro FX4000 BIOS)

    17. Now take a look at the Forceware driver again. You should still have the OpenGL settings beside the Quadro FX4000 logo. Run Specview once more and compare the results.

    17.1 If you do not have the OpenGL settings in the Forceware, but see the Quadro FX4000 logo and game optimization settings like those in the standard GeForce drivers instead then do this:

    17.2 Run Rivatuner and go to "Main"->Customize->"Low Level system settings"->"NVStrap driver" tab and uncheck "Allow enale hardware masked units" (but you should still see that you have "16x1, 6vp"). Reboot. The OpenGL settings in Forceware must be back now. So, the Quadro driver features must be activated, too. Run Specview once more to confirm.

    18. Read the other posts in this thread /forum to finetune your card, like BIOS mod again to enable the masked pipelines without using Rivatuner or the TV-Out thing. Get nVidia's MAXtreme driver if you are using 3dsmax.

    I hope in this step by step instruction I don't miss something important that leads to the destruction of your GF6800 . I am not responsible for your doings







  • Bunlarda milletin test sonuçları..

    Ok, this is my first post here after reading this forum for several years. Thanks to Unwinder for his cool rivatuner tool and the others I learned from. :-)

    I can confirm the 6800NU->FX4000 BIOS mod posted at the Korean page. It is a Leadtek WinFast A400 TDH (GF6800, 128MB) I flashed with the Dell BIOS. The results I got from Specview 8.01 is more that of an FX3400 - what is no surprise to me since I have only a standard 6800.

    Here are my Specview 8.0 results before the mod (ok, I forgot to turn VSync Off, but all vertex & pixel pipelines unlocked, thanks again, Unwinder!):
    ___________________________________________
    Run All Summary

    ---------- SUM_RESULTS\3DSMAX\SUMMARY.TXT
    3dsmax-03 Weighted Geometric Mean = 14.70

    ---------- SUM_RESULTS\CATIA\SUMMARY.TXT
    catia-01 Weighted Geometric Mean = 10.07

    ---------- SUM_RESULTS\ENSIGHT\SUMMARY.TXT
    ensight-01 Weighted Geometric Mean = 9.244

    ---------- SUM_RESULTS\LIGHT\SUMMARY.TXT
    light-07 Weighted Geometric Mean = 8.996

    ---------- SUM_RESULTS\MAYA\SUMMARY.TXT
    maya-01 Weighted Geometric Mean = 17.73

    ---------- SUM_RESULTS\PROE\SUMMARY.TXT
    proe-03 Weighted Geometric Mean = 13.18

    ---------- SUM_RESULTS\SW\SUMMARY.TXT
    sw-01 Weighted Geometric Mean = 11.40

    ---------- SUM_RESULTS\UGS\SUMMARY.TXT
    ugs-04 Weighted Geometric Mean = 3.985

    ___________________________________________
    here after the mod:

    Run All Summary

    ---------- SUM_RESULTS\3DSMAX\SUMMARY.TXT
    3dsmax-03 Weighted Geometric Mean = 21.09

    ---------- SUM_RESULTS\CATIA\SUMMARY.TXT
    catia-01 Weighted Geometric Mean = 17.27

    ---------- SUM_RESULTS\ENSIGHT\SUMMARY.TXT
    ensight-01 Weighted Geometric Mean = 16.33

    ---------- SUM_RESULTS\LIGHT\SUMMARY.TXT
    light-07 Weighted Geometric Mean = 20.01

    ---------- SUM_RESULTS\MAYA\SUMMARY.TXT
    maya-01 Weighted Geometric Mean = 33.19

    ---------- SUM_RESULTS\PROE\SUMMARY.TXT
    proe-03 Weighted Geometric Mean = 24.43

    ---------- SUM_RESULTS\SW\SUMMARY.TXT
    sw-01 Weighted Geometric Mean = 17.53

    ---------- SUM_RESULTS\UGS\SUMMARY.TXT
    ugs-04 Weighted Geometric Mean = 28.16




    Here are the results of my modded GF6800->QuadroFX4000 in Specviewperf 7.1.1. I didn't run the tests with my unmodded GF6800, because I have go all the way back which doesn't make much sense to me.
    _______________________________________________
    Run All Summary

    ---------- SUM_RESULTS\3DSMAX\SUMMARY.TXT
    3dsmax-02 Weighted Geometric Mean = 22.87

    ---------- SUM_RESULTS\DRV\SUMMARY.TXT
    drv-09 Weighted Geometric Mean = 76.44

    ---------- SUM_RESULTS\DX\SUMMARY.TXT
    dx-08 Weighted Geometric Mean = 103.0

    ---------- SUM_RESULTS\LIGHT\SUMMARY.TXT
    light-06 Weighted Geometric Mean = 22.94

    ---------- SUM_RESULTS\PROE\SUMMARY.TXT
    proe-02 Weighted Geometric Mean = 23.84

    ---------- SUM_RESULTS\UGS\SUMMARY.TXT
    ugs-03 Weighted Geometric Mean = 58.36

    _______________________________________________

    All benchmarking was done with Forceware 67.20 w/ VSync Off. My modded GF6800->QuadroFX4000 is running at standard GF6800 speed, core 325MHz/ memory 350MHz(DDR700MHz). I re-programmed the Dell BIOS to the standard GF6800 speed, else I would fry my GF6800.

    ------------------------------------------------------------------------------------
    WARNING!!!
    I suggest that you run your modded NV40 at the standard speed of your 6800LE/NU/GT/Ultra whatever was meant to run. Thus, use the BIOS tweak tool "OmniExtremeEditorFX" posted at that Korean site to re-programm the core/memory frequency of the DELL Quadro FX4000 BIOS. I have both 2D/3D performance set to the same level(GF6800, 325/350MHz).
    I am not responsible for any damages you made to your card!!!
    ------------------------------------------------------------------------------------

    All pixel and vertex pipelines are unlocked w/ rivatuner after the BIOS mod. One thing I run into is that I have to leave the checkbox "Allow enabling hardware masked units" unchecked at the "NVStrap driver" tab. Otherwise, I don't get the Quadro feature panel opened in the Forceware driver - the OpenGL settings, you know.




    I couldn't resist

    Modified Dell bios to stock GT speed (350/1000), applied bios patch and flashed Gigabyte 6800 GT.

    Original card layout reads as "nv40 board q201-7"
    Non modified SpecView 8.0.1:

    vsync disabled via RT


    code:--------------------------------------------------------------------------------
    Run All Summary

    ---------- SUM_RESULTS\3DSMAX\SUMMARY.TXT
    3dsmax-03 Weighted Geometric Mean = 19.36

    ---------- SUM_RESULTS\CATIA\SUMMARY.TXT
    catia-01 Weighted Geometric Mean = 12.61

    ---------- SUM_RESULTS\ENSIGHT\SUMMARY.TXT
    ensight-01 Weighted Geometric Mean = 6.549

    ---------- SUM_RESULTS\LIGHT\SUMMARY.TXT
    light-07 Weighted Geometric Mean = 12.39

    ---------- SUM_RESULTS\MAYA\SUMMARY.TXT
    maya-01 Weighted Geometric Mean = 24.96

    ---------- SUM_RESULTS\PROE\SUMMARY.TXT
    proe-03 Weighted Geometric Mean = 15.95

    ---------- SUM_RESULTS\SW\SUMMARY.TXT
    sw-01 Weighted Geometric Mean = 12.96

    ---------- SUM_RESULTS\UGS\SUMMARY.TXT
    ugs-04 Weighted Geometric Mean = 4.655
    --------------------------------------------------------------------------------



    After bios flash card layout reads as "nv40 board q201-2".

    Some RT info:

    code:--------------------------------------------------------------------------------
    $ffffffffff ---------------------------------------------------
    $ffffffffff Display adapter information
    $ffffffffff ---------------------------------------------------
    $0000000000 Description : NVIDIA Quadro FX 4000
    $0000000001 Vendor ID : 10de (NVIDIA)
    $0000000002 Device ID : 004e
    $0000000003 Location : bus 1, device 0, function 0
    $0000000004 Bus type : AGP revision 3.0
    $0000000005 AGP status : enabled
    $0000000006 AGP rate : 4x 8x supported, 8x selected
    $0000000007 AGP SBA : hardwired, enabled
    $0000000008 AGP FW : supported, enabled
    $0000000009 Base address 0 : e8000000 (memory range)
    $000000000a Base address 1 : d0000000 (memory range)
    $000000000b Base address 2 : e9000000 (memory range)
    $000000000c Base address 3 : none
    $000000000d Base address 4 : none
    $000000000e Base address 5 : none
    $ffffffffff ---------------------------------------------------
    $ffffffffff NVIDIA specific display adapter information
    $ffffffffff ---------------------------------------------------
    $0100000000 Graphics core : NV40 revision A1 (16x1,6vp)
    $0100000001 Hardwired ID : 0045 (ROM strapped to 004e)
    $0100000002 Memory bus : 256-bit
    $0100000003 Memory type : DDR (RAM configuration 07)
    $0100000004 Memory amount : 262144KB
    $0100000005 Core clock : 351.000MHz
    $0100000006 Memory clock : 501.188MHz (1002.375MHz effecti...
    $0100000007 Reference clock : 27.000MHz
    $010000000b HW masked units : none
    $ffffffffff ---------------------------------------------------
    $ffffffffff NVIDIA VGA BIOS information
    $ffffffffff ---------------------------------------------------
    $ffffffffff Cannot dump NVIDIA VGA BIOS information
    $ffffffffff ---------------------------------------------------
    $ffffffffff NVIDIA graphics processor registers
    $ffffffffff ---------------------------------------------------
    $020100003c CR3C : 00000078
    $0200000000 NV_PMC_BOOT_0 : 440e00a1
    $0200001080 NV_PBUS_DEBUG_0 : 00000000
    $0200001084 NV_PBUS_DEBUG_1 : 00215609
    --------------------------------------------------------------------------------



    and SpecVew 8.0.1. after flash:

    vsync enabled:

    code:--------------------------------------------------------------------------------
    Run All Summary

    ---------- SUM_RESULTS\3DSMAX\SUMMARY.TXT
    3dsmax-03 Weighted Geometric Mean = 29.43

    ---------- SUM_RESULTS\CATIA\SUMMARY.TXT
    catia-01 Weighted Geometric Mean = 18.89

    ---------- SUM_RESULTS\ENSIGHT\SUMMARY.TXT
    ensight-01 Weighted Geometric Mean = 19.67

    ---------- SUM_RESULTS\LIGHT\SUMMARY.TXT
    light-07 Weighted Geometric Mean = 17.79

    ---------- SUM_RESULTS\MAYA\SUMMARY.TXT
    maya-01 Weighted Geometric Mean = 32.51

    ---------- SUM_RESULTS\PROE\SUMMARY.TXT
    proe-03 Weighted Geometric Mean = 33.38

    ---------- SUM_RESULTS\SW\SUMMARY.TXT
    sw-01 Weighted Geometric Mean = 18.08

    ---------- SUM_RESULTS\UGS\SUMMARY.TXT
    ugs-04 Weighted Geometric Mean = 29.21
    --------------------------------------------------------------------------------



    vsync disabled via RT:

    code:--------------------------------------------------------------------------------
    Run All Summary

    ---------- SUM_RESULTS\3DSMAX\SUMMARY.TXT
    3dsmax-03 Weighted Geometric Mean = 30.70

    ---------- SUM_RESULTS\CATIA\SUMMARY.TXT
    catia-01 Weighted Geometric Mean = 20.01

    ---------- SUM_RESULTS\ENSIGHT\SUMMARY.TXT
    ensight-01 Weighted Geometric Mean = 22.14

    ---------- SUM_RESULTS\LIGHT\SUMMARY.TXT
    light-07 Weighted Geometric Mean = 20.03

    ---------- SUM_RESULTS\MAYA\SUMMARY.TXT
    maya-01 Weighted Geometric Mean = 35.79

    ---------- SUM_RESULTS\PROE\SUMMARY.TXT
    proe-03 Weighted Geometric Mean = 42.20

    ---------- SUM_RESULTS\SW\SUMMARY.TXT
    sw-01 Weighted Geometric Mean = 20.20

    ---------- SUM_RESULTS\UGS\SUMMARY.TXT
    ugs-04 Weighted Geometric Mean = 34.77
    --------------------------------------------------------------------------------




  • Olayı toplarsak,Türkçe olarak tam olarak ne olmuş

    Ne o,kart Quadro 4000 olmuş gibi sezdim,hahahah

    Kubilaylay
  • kartı flashladıktan sonra niye rivatuner kullanmış direk orginal driveri kurunca quadro olarak çalişması gerekmez mi flashlanmış biosla pipelar kendiliğinden açılmıyomu ayrıca
  • quote:

    Orjinalden alıntı: FATALcan

    kartı flashladıktan sonra niye rivatuner kullanmış direk orginal driveri kurunca quadro olarak çalişması gerekmez mi flashlanmış biosla pipelar kendiliğinden açılmıyomu ayrıca

    Peki Sırf quadro biosunu yükleyince puan ne kadar artmış?
  • Flashladığınız karta göre değişiyor.

    Elinizde 6800 Ultra ve GT varsa o zaman Rivatunera gerek kalmıyor.

    Rivatunerın amacaı standart. Kapalı shader ve pipelineları açmak.

    Not: Ben Dell biosunu yükledim.Şuanda işyerindeyim kart makinayı açmadı.Akşam eve gidince farklı bioslarla deneyeceğim.(Tabi kartı mefta etmediysem)

    Başarılı olursam bilgilendiririm.
  • %50'ye varan artışlar olmuş performansta. Hele 2 tane 6800 Ultra'yı Quadro FX4000'e modlayıp extreme soğutma ile SLI olarak 3dmark aldığınızı düşünsenize. Gerçi emin değilim Quadroların SLI desteklediğinden ama ya olursa? Eh mesajı alanlar almıştır artık
  • Yapay Zeka’dan İlgili Konular
    Daha Fazla Göster
  • %50 mi?
    bu overclock gerçekten bir hastalık yaw. bu %50 yi duyunca insan kendini tutamıyo işde.
  • quote:

    Orjinalden alıntı: rabesantrata

    %50 mi?
    bu overclock gerçekten bir hastalık yaw. bu %50 yi duyunca insan kendini tutamıyo işde.

    He walla yaaa..
    ASkerde kendıme o/c yapıcam.
  • quote:

    Orjinalden alıntı: sturmovik

    %50'ye varan artışlar olmuş performansta. Hele 2 tane 6800 Ultra'yı Quadro FX4000'e modlayıp extreme soğutma ile SLI olarak 3dmark aldığınızı düşünsenize. Gerçi emin değilim Quadroların SLI desteklediğinden ama ya olursa? Eh mesajı alanlar almıştır artık

    Destekliyor.
  • quote:

    Orjinalden alıntı: Diabelica

    Flashladığınız karta göre değişiyor.

    Elinizde 6800 Ultra ve GT varsa o zaman Rivatunera gerek kalmıyor.

    Rivatunerın amacaı standart. Kapalı shader ve pipelineları açmak.

    Not: Ben Dell biosunu yükledim.Şuanda işyerindeyim kart makinayı açmadı.Akşam eve gidince farklı bioslarla deneyeceğim.(Tabi kartı mefta etmediysem)

    Başarılı olursam bilgilendiririm.

    Bilgilendiririm demişsiniz, sizden gelişmeler hakkında bilgi bekliyorum...
  • quote:

    Orjinalden alıntı: CoOLMuSTi


    quote:

    Orjinalden alıntı: Diabelica

    Flashladığınız karta göre değişiyor.

    Elinizde 6800 Ultra ve GT varsa o zaman Rivatunera gerek kalmıyor.

    Rivatunerın amacaı standart. Kapalı shader ve pipelineları açmak.

    Not: Ben Dell biosunu yükledim.Şuanda işyerindeyim kart makinayı açmadı.Akşam eve gidince farklı bioslarla deneyeceğim.(Tabi kartı mefta etmediysem)

    Başarılı olursam bilgilendiririm.

    Bilgilendiririm demişsiniz, sizden gelişmeler hakkında bilgi bekliyorum...

    bende bende




  • Kartı geri 6800gt ye flasladım.Ben yanlış anlamışım olayı biosa gerek yokmuş driverlarla ve Rivatunerla halledilebiliyormuş.

    Deneme şansım daha olmadı.Bu ara baya yoğun çalışıyoruz.
  • Nasıl yanlış anladın...?? burda yazılanlar flash'dan bahsediyor...

    First you need to download these things:
    1. Dell Quadro BIOS from HERE
    2. the NVFlash 5.10 tool from
    HERE
    3. OmniExtremeEditorFX for changing the NV40 core/memory frequency from this link HERE

    additional tools:
    4. Make a standard 3 1/2" bootdisk in Windows
    5. Download the 67.02 Forceware driver(just for the start, but any 6x.xx or higher will do) and RivaTuner 2.0 RC15.2, just look for them at download section ofhttp://www.guru3d.com/
    5.1: Download SPECviewperf 7.1.1 and/or 8.0.1 and make a test run before you start the modding. Save the results to a text file.
    6. Have a spare PCI graphics card handy for the emergency case!


    Preparations:
    7. Write down these two DOS commands on a paper, you will need them after you boot from the bootdisk:

    nvflash -b backup.rom

    nvflash -4 -5 -6 dell01.rom




  • Yok oradan yazılanlar fashtan bahsediyor ona lafım yok.Ben sadece driverla yapılabileceğine dair birkaç yazı daha bulmuştum.Onu demek istedim.

    İl flasladığım Dell biosu olmadı çünkü.
  • QUADRO YA ÇEVİRMEK HEE,BENİM KARTI QUADROYA ÇEVİRSEK KİM BİLİR NELER YAPARIZ:)
  • Bu topicte genelanlamda bir yanlış anlaşılma var.

    Quadro kartlar oyunlarda benchlerde o kadar performans göstermez.3dmax maya gibi uygulamalarda özel optimizasyonlu driverları sayesinde oldukça performans gösterirler.
  • quote:

    Orjinalden alıntı: Beast

    quote:

    Orjinalden alıntı: sturmovik

    %50'ye varan artışlar olmuş performansta. Hele 2 tane 6800 Ultra'yı Quadro FX4000'e modlayıp extreme soğutma ile SLI olarak 3dmark aldığınızı düşünsenize. Gerçi emin değilim Quadroların SLI desteklediğinden ama ya olursa? Eh mesajı alanlar almıştır artık

    Destekliyor.


    Eh o zaman işbaşına coşturun 6800'lerinizi




  • quote:

    Orjinalden alıntı: Diabelica

    Bu topicte genelanlamda bir yanlış anlaşılma var.

    Quadro kartlar oyunlarda benchlerde o kadar performans göstermez.3dmax maya gibi uygulamalarda özel optimizasyonlu driverları sayesinde oldukça performans gösterirler.

    +1
  • quote:

    Orjinalden alıntı: Diabelica

    Bu topicte genelanlamda bir yanlış anlaşılma var.

    Quadro kartlar oyunlarda benchlerde o kadar performans göstermez.3dmax maya gibi uygulamalarda özel optimizasyonlu driverları sayesinde oldukça performans gösterirler.

    Çok ilginç yaaa,ne değişiyorda performans değişiyor acaba.Yada 3d max de performans artarken neden 3f mark da puan yükselmiyor
  • 
Sayfa: 12
Sayfaya Git
Git
sonraki
- x
Bildirim
mesajınız kopyalandı (ctrl+v) yapıştırmak istediğiniz yere yapıştırabilirsiniz.