Nvidia GTX 590 incelemeleri

quote:

Orijinalden alıntı: tolgacem

Türkiyeden inceleme

http://www.techno-labs.com/1/23926/1/inceleme:-nvidia-gtx-590.html

quote:

Orijinalden alıntı: EMRES754

Kartta overclock ile ilgili hiç iyi haberler gelmiyor.O kadarki chipte sorun çıkmış.

"Performing overclocking the GTX 590 can only be described as a big pain in the ass. I've never seen a more crash-happy card than this when doing overclocking. Basically my "find maximum overclock" consisted of setting a clock speed, running a benchmark for 10 seconds and then waiting 45 seconds until the system finished rebooting after a system hang. If you plan to do overclocking, please make a system image backup, so you can recover quickly in case the constant system crashes break something.

Overclocking potential is quite nice and pays of well if you are willing to tackle it."

Techpoweruptan alınmıştır.

"With a card like GeForce GTX 590, that has so much latent performance, I couldn't wait to try bumping the voltage to see how much I could gain from it.

As a first step, I increased the voltage from 0.938 V default to 1.000 V, maximum stable clock was 815 MHz - faster than GTX 580! Moving on, I tried 1.2 V to see how much could be gained here, at default clocks and with NVIDIA's power limiter enabled. I went to heat up the card and then *boom*, a sound like popcorn cracking, the system turned off and a burnt electronics smell started to fill up the room. Card dead! Even with NVIDIA power limiter enabledCard dead! Even with NVIDIA power limiter enabled. Now the pretty looking, backlit GeForce logo was blinking helplessly and the fan did not spin, both indicate an error with the card's 12V supply.
After talking to several other reviewers, this does not seem to be an isolated case, and many of them have killed their cards with similar testing, which is far from being an extreme test."

"
With the card dead, I looked for any damage and found one of the 12V input resistors acting as fuses to be damaged (1st pic, no visible damage), so I soldered a bridge on it to bypass it, the card then "exploded" again, this time one of the MOSFETs blew up as shown in the second picture above. This was just an experimental fix to potentially revive the card. If only the resistor was damaged then it should be working fine again, looks like something else was broken and the "fuse" resistor merely blew to protect the card.

Thanks to the kind people at ASUS, I was lucky enough to have two cards for an SLI review - for which NVIDIA could still not provide a Quad-SLI supporting driver. So at least I could finish the rest of this review. I most strongly ****e anyone to stay away from overclocking this product and use extremely conservative settings, maybe up to 650 MHz and no voltage adjustments.

According to NVIDIA this should not happen. In their official reviewer driver (which I used), the NVIDIA Power limit is designed to be active for all applications, not only Furmark."

Gördüğümüz üzere "MOSFET" yanmış ve kart tamamen kullanılmaz hale gelmiş.