[XDA] [IDEOS X5] [4.4.4 KITKAT] [CM11] [07.09.2014 UPDATE1] Blefish Unofficial CM11 (6. sayfa)

cizkek_ · 2014-02-03T17:50:08.0000000+03:00

HER HANGİ BİR SORUN İLE KARŞILAŞTIĞINIZ DA BANA E-POSTA YOLU İLE ULAŞABİLİRSİNİZ. MALESEF ARTIK IDEOS X5 KULLANMIYORUM. ANLAYIŞINIZ İÇİN TEŞEKKÜR EDERİM ^^ http://forum.xda-developers.com/showthread.php?t=2616956 quote: /> quote: Blefish tarafından xda'da yayınlanan CM11 (4.4.4) ROM'udur. http://forum.xda-developers.com/showthread.php?t=2616956 https://github.com/Blefish https://twitter.com/rtammekivi Güncellemeleri ve gelişmeleri buraya alıntılayarak çevireceğim. Yeni yılda oldukça meşgul olduğum için konuyu takip edemiyor ve gerekli olduğu zamanlarda yardımcı olamıyorum. Lütfen kusuruma bakmayın. Elimden geldiğince yardımcı olmak isterim. Bana özel mesaj yoluyla ulaşabilirsiniz. Teşekkürler. Yüksek çözünürlük 1 Yüksek çözünürlük 2 1 2 3 4 Gerekenler • 404020 baseband'ına sahip olmak. (2.3'e yükseltme yapılırken otomatik olarak yükleniyor.) • /system sistem bölümünde en az 450 mb'ye sahip olmak ( BlePart 2.x kurmalısınız. ) • CWM recovery v6.0.4.6 (veya SELinux destekli başka bir recovery, Forumber TWRP ) Yükleme • Paketin son versiyonunu indirin. • Paketi hafıza kartınıza atın ve recovery'ye girin. • Başka bir ROM'dan geçiş yapacaksanız 'factory reset' atın. • Paketi yükleyin. -İsteğe bağlı olarak Google uygulamalarını yükleyin. Google uygulamaları için: https://itvends.com/gapps/ • Yeniden başlatın. Sorunlar (Son versiyonda) Notlar kısmına göz atmanızda fayda var. • Synaptics TS zaman zaman bekleme durumundan çıkamayabilir. • Atmel TS (nadiren) parmak çekildiğinde algılamayabilir (basılı kalabilir). • Bazen Wi-Fi güç kullanımı çok yüksek olabilir. • 07.09.2014 için: -http://forum.xda-developers.com/showpost.php?p=55300574postcount=807 -http://forum.xda-developers.com/showpost.php?p=55319333postcount=814 -http://forum.xda-developers.com/showpost.php?p=55322089postcount=817 -http://forum.xda-developers.com/showpost.php?p=55396840postcount=832 -http://forum.xda-developers.com/showpost.php?p=55585716postcount=851 İndirmeler 07.09.2014 ve UPDATE1 • cm-11-20140907-UNOFFICIAL-Blefish-u8800.zip • cm-11-20140907-UNOFFICIAL-Blefish-u8800-update1.zip 03.08.2014 • cm-11-20140803-UNOFFICIAL-Blefish-u8800.zip 27.06.2014 • cm-11-20140627-UNOFFICIAL-Blefish-u8800.zip 17.06.2014 • cm-11-20140617-UNOFFICIAL-Blefish-u8800.zip 16.05.2014 • cm-11-20140516-UNOFFICIAL-Blefish-u8800.zip 11.05.2014 • cm-11-20140511-UNOFFICIAL-Blefish-u8800.zip 27.04.2014 • cm-11-20140427-UNOFFICIAL-Blefish-u8800.zip 06.04.2014 • cm-11-20140406-UNOFFICIAL-Blefish-u8800-update3.zip • cm-11-20140406-UNOFFICIAL-Blefish-u8800.zip 24.02.2014 • cm-11-20140224-UNOFFICIAL-Blefish-u8800.zip 09.02.2014 • cm-11-20140209-UNOFFICIAL-Blefish-u8800.zip 19.01.2014 • cm-11-20140119-UNOFFICIAL-Blefish-u8800.zip • Test4: cm-11-20140119-test4-signed.zip Notlar • Eğer modeminize bağlanamıyorsanız, modeminizin arayüz sayfasında, kablosuz ayarlarından "40/20 mhz" kısmını sadece "20 mhz" yapın ve kaydedin. • Eğer KSM seçeneği telefonunuzda aktif ise kapatmanız tavsiye edilir. (CMA ve KSM arasındaki uyumsuzluklardan dolayı sorunlar oluşabilir.) • Forumber tarafından ZRAM ve SWAP eklendi. • 24.02.2014 Sürümünde eski Synaptics TS sürücüsüne geçildi • 24.02.2014 Sürümünde eski batarya sürücüsüne geçildi. • X5'in bir çok varyasyonu olduğu için her problemle karşılaşılmayabiliyor, 19.01.14 için olan Test4 ile çözülen grafik problemleri gibi. • 27.06.2014 için: http://forum.xda-developers.com/showpost.php?p=53722651postcount=659 • 17.06.2014 için: quote: New release up, enjoy! Built upon the latest code there is (as always). Wi-Fi should not crash the phone anymore, but if it does, now you can send me the logs (check second post). It may have occasional high power usage, but it is improved over the last version. I swapped the Synaptics driver with a new one. This driver does not have freezes (another developer helped testing it) it should enter/exit suspend properly. Hopefully this one does not corrupt the firmware, unlike the previous one did (for some users). If you want to have the latest CWM recovery installed (compiled with the ROM), you can now enable it in Settings->Development options->Update CM recovery. If you enable it, next reboot will install the latest recovery (which does not have freezing issues). If you currently have KSM enabled, you may have to disable it. A while after booting up, the video decoder/encoder no longer works otherwise (this is due to incompatibility between CMA KSM). •03.08.2014 için: - http://forum.xda-developers.com/showpost.php?p=54583547postcount=755 - http://forum.xda-developers.com/showpost.php?p=54586058postcount=759 07.09.2014 Added error checks for pmem_wrapper. Added support for flush_pmem_file/fd in pmem_wrapper. Enabled newer APANIC_MMC driver. Fixed a security bug in net. Fixed NG (noise gate) enable in TPA2028D1. Increased SF heap size by 2MB. Reverted to 2.6.32 speaker handset microphone config. Reverted to 2.6.32 speaker speaker amplifier config (should greatly improve music quality loud speaker in calls). Reconfigured Atmel TS with 2.6.32 parameters (greatly improving experience, reducing touch freeze to nearly zero). Made proximity sensor report initial value after enabling (fixing proximity wake if enabled). Improved magnetic sensor calibration code. Disabled RIL debug socket (not working anyway). Process RIL response codes properly (unsolicited). Added support for getDataCallProfile in RIL. Minor cleanups in camera HAL. Disabled continuous auto-focus in preview mode (apps that support continuous-video can still use). Store all ifaces properly in RIL (fixes MMS). Supply active/status in RIL. Rearranged media_codecs.xml Enabled Qualcomm HW MP3 decoder. Added entries for tcp delayed ack. Fixed keyboards error with home key declaration. Supply gateway with data call parameters in RIL. Removed TARGET_ARCH_LOWMEM (testing). Remove unused console entry when booting up (ttyDCC0 is not available on u8800 by default). Wi-Fi: Remove all unused GPIOs. Wi-Fi: Make sure wlan2 regulator is at 2.5v. Wi-Fi: Disable pmapp vreg voting (may fail, which causes high power usage). 03.08.2014 Disabled gapless mode (fixes some issues when LPA is enabled). Removed ffmpeg h263/h264/mpeg4 entries (covered by HW Google). Updates to power HAL (from LX). Increase light sensor multiplier to 5.0f Use auto-brightness mapping from m7. Sample proximity sensor data for both close/far. Disabled MDP retire fence. Remove more dead code from camera HAL. Use custom virtual key mapping in recovery. Fix BT power entries (in reversed order). Added informative BT power class. Enabled BT In-Band Sleep. Increased BT serial baud-rate to 3MB. Removed unneeded libmm-omxcore from build. Disabled display HAL patch for PMEM support. Enabled ION support in camera HAL. Moved camera HAL out of Android namespace. Enabled PMEM->ION wrapper (pmem now uses ION memory). Added support for continuous auto focus (experimental). Wi-Fi: Enable FW to handle probe requests. Wi-Fi: Remove XO core voting. Synced with kk_2.7-stable Minor updates to ION cma heap. Updated BFQ scheduler to v7r5. Minor updates to various kernel drivers. Disabled voltage battery driver (not used right now). Delay Synaptics resume 50ms (experimental). Disabled fluence in qdsp5v2. Converted qdsp5v2 devices to ION. Enabled Huawei battery driver (sends consumer events to modem). Increase light/proximity sensor delay .5 ms. Get battery voltage from modem. Do not allow RPC to reconnect on reboot call. 27.06.2014 Make sure accelerometer/magnetometer/touch screen power regulators are turned on/off when needed. Minor changes with APS-12D driver. Extend the list of CPU frequencies (experimental). Reboot/shutdown is now faster in kernel side (IRQ is disabled properly). Recovery: ADB sideload now works for zips up to 220MB. Disabled FMEM for PMEM_ADSP heap. Enabled CMA for PMEM_ADSP heap (increases available total memory when camera is not used). Minor adjustments in kernel board code. Disabled unsupported BT features (BLE, SMP). Removed junk on init.qcom.rc. Code optimizations in camera driver. Wi-Fi: Sync with volans. Wi-Fi: Add back XO buffer controls. Wi-Fi: Make sure device mode is correct without P2P enabled (after volans sync). Wi-Fi: Use board provided MAC address on Huawei U8800 (after volans sync). Wi-Fi: Start/Stop SME sessions without completion variables (after volans sync). Wi-Fi: Add back RF settling time config (after volans sync). Wi-Fi: Set low SD clock frequency. 17.06.2014 Enabled BFQ IO scheduler (v7r4). Enabled deadline IO scheduler. Removed unused modules. Added cifs module. Changed interrupt line to low (should help with TS issues). Wi-Fi: Disabled early suspend deep sleep. Wi-Fi: Sync with volans (includes changes to qcom_cfg.ini). Added support to auto-update recovery (must be enabled manually in development options). Decreased BT startup time by nearly one second. Increased BT buffer size to 1024. Supress wakelocks when RIL gets unsupported message. Patched multiple Linux kernel security bugs. Patched some kernel panics. Enabled MM to use CMA heap (more memory when video encoder/decoder is not in use). Enabled PMEM ADSP heap to use FMEM (more memory when camera is not in use). Updated to kk-2.7-stable. Added deferred timers to KSM. Increased audio buffer size. Added availability to use phone as USB keyboard/mouse (https://play.google.com/store/apps/details?id=remote.hid.keyboard.client) Disabled EXT2 (EXT4 handles it). Disabled VCAP (not used). Disabled video adapters tuners (not used). Disabled unused ethernet drivers (not used). Set LSM mmap minimum address to 4096. Enabled faster USB scheduler. Use default memory allocator (SLUB). Disabled KGSL shadow writes (should solve some GPU errors). Enabled various networking options. Added new Synaptics driver. Increased MM heap size (some apps failed to use video decoder). Changed DCDC bus config (used for charger). Enabled RCU boost. Enabled APANIC driver (on hard crash, logs dumped to /data/dontpanic/) Removed CMUpdater (as it is not useful on this ROM). 16.05.2014 Fixed SIM lock status (can now be enabled/disabled changed properly). Added more CPU frequencies (1.5-1.8 GHz). Changed microphone configuration in handset speaker mode (48KHz for all types, according to stock). Added newer Adreno libraries (AU_LINUX_ANDROID_KK_2.7_RB1.04.04.00.007.018). Patched a new exploit found in Linux kernel (http://arstechnica.com/security/2014/05/linux-gets-fix-for-code-execution-flaw-that-went-unpatched-since-2009/). Temporary: partially reverted Theme Engine (fixes SystemUI lockups high memory usage). 11.05.2014 Updated to kk-2.7-stable. Added BT/WLAN MAC address configuration to IDEOSX5Settings. Wi-Fi: Restart wlan module from start. Wi-Fi: Remove GPIO20 configuration (SD card detect on U8800). Wi-Fi: Read MAC address from kernel (on U8800). Wi-Fi: Sync with volans (fixes Wi-Fi hotspot). Restart audio, media codecs configuration. Restart audio policy configuration. Allow BT/WLAN mac address to be read from kernel (/sys/hwprops/) Reduced Torch low brightness (128 vs 64). If it's too dim you can always enable high brightness. Enable SD eject option. Fixed an issue where "Please replug headset" was shown after reboot (no need to replug in that case). Disable LPA (to manually enable, /system/build.prop : lpa.decode=true) Enabled ffmpeg codecs. 27.04.2014 Added S/N reading from kernel side. Synced wifi changes from prima (mostly code style related). Wi-Fi should now start always (bug introduced in the last release). Updated to kk-2.7-stable. Reverted to stock audio configuration. Added new TPA2028D1 driver. Improved Synaptics TS (should not freeze anymore). Increased USB power budget to allow more devices to connect. 06.04.2014 Added S/N reading. Adjust zRAM settings for better performance Adjust KSM settings for better performance Added /sdcard -> /storage/sdcard0 for some apps. hwmac -> hwprops Fixed wifi memory deallocation problem on exit. Added multiple changes to wifi from prima driver. Removed more dead code from the kernel. Fixed portrait videos rotation below 720p. Fixed camera EXIF data for maker model. Fixed third party camera software (Focal). Added possibility to mask mass storage as cdrom (DriveDroid can benefit from this). Solved problem with display when sending "stop" "start" commands. Using zRAM from 3.14 kernel. Updated to kk-2.7-stable. Reverted to default audio configuration (wip). 24.02.2014 AAC playback fixed. Fixed LEDs pulsing in wrong order. Notification->Attention->Battery (LED priority list). Reverted to older Synaptics driver (should fix lockups). Rebased kernel to kk_2.7_rb1.27. Fixed some volume/audio problems (need to be confirmed, speaker mode in call is still bugged). Fixed microphone not muting while in call. Fixed problems with FM radio volume (going loud when switching). Fixed sound recorder. Adjusted proximity sensor thresholds. Fixed battery capacity (using Huawei method for now). Enabled zRAM (thanks to @forumber2). 09.02.2014 Rebased kernel on kk_2.7_rb1.22 (minor fixes, better graphics performance). Fixed Synaptics TS freeze (finger not tracked) (not confirmed). Fixed display freezing on some targets. Added pulsing notification leds with customizable speed (hardware blinking). Fixed RIL without SIM. Fixed sometimes phone going very laggy (caused by RIL). Added FM radio support. Decreased speaker db range (should improve quality). Added v2 of DeviceSettings (now called IDEOS X5 Settings) Added support for customizable BT power. Added support for customizable charging current. Adjusted proximity sensor (50mA current lets more IR light through). Removed bloat from camera HAL (WiP). Rebased kernel on latest branch for KK (improves graphics minor fixes). Added more codecs to support more audio/video formats. Fixed some VIDC memory leaks (causing video recording/playback problems). Removed unused adreno library replaced with a new one. 19.01.2014 (These changes have been made upon the latest cm-10.1 version) Updated codebase to cm-11.0. Fixed camera flash. Fixed video recording. Fixed video HW playback. Applied some fixes to audio HAL. Fixed a problem where the charger was shown connected even though it wasn't. Applied smaller fixes to display driver. Released some unused memory. Using MDP retire fence (may fix some display problems). Removed some unused kernel drivers. Updated android kernel counterpart drivers (binder, lowmemorykiller) Updated freezer driver. Enabled SELinux. Added CMHW vibrator scaling (in Settings->more). Stripped vibrator tuning from DeviceSettings. Added modifiable button brightness. Added modifiable notification leds. Greatly reduced init.rc scripts. Enabled KSM. Added QCOM optimizations for faster CPU operations. Added support to multimount UMS (internal external). Added support for /data encryption. Added torch with two brightness setting. Fixed some camera problems. Added Finnish translations to DeviceSettings (zazza97) Enabled QCOM Audio/Video enhancements. Enabled low_ram flag. Updated synaptics driver. Smaller fixes for APS-12D driver. Disabled highmem in kernel (should reduce the footprint a lil). Fixed Wi-Fi not starting problems. Reduced the time where display does not enter/exit sleep properly. Updated CPU power management driver. Updated FUSE driver (for SD cards). Removed some unused memory allocations. Build RIL daemon and libril from source. Removed some bloat in camera HAL.

Sıcak Fırsatlarda Tıklananlar

Editörün Seçtiği Fırsatlar

Daha Fazla

Bu Konudaki Kullanıcılar: Daha Az

2 Misafir (1 Mobil) - 1 Masaüstü,

1 Mobil

5 sn

1.213
Cevap

14
Favori

53.596
Tıklama

Daha Fazla
İstatistik

Konu İstatistikleri Yükleniyor

Konuya Özel

0 oy

Öne Çıkar

Cevapla

Sayfa:

önceki 4 5 6 7 8

Giriş

Mesaj

dikerow

Yüzbaşı

270 Mesaj